How To Clean Bowling Shoes Slide Strip & Maintain Soles
Want to know how to clean your bowling shoe slide strips for optimal performance? Check out this article for step-by-step instructions and tips to ensure your soles stay clean and well-maintained.
For a good bowling game, keeping the soles of your shoes clean and in good shape is important. Dirty soles can hinder performance and even put the bowler in danger. In this article, we'll show you how to clean the slide strips on your bowling shoes and give tips on keeping the soles in good shape for the best performance.
We'll talk about both interchangeable and non-interchangeable soles and show you step-by-step how to clean your shoes with soap and water in the best way. So, whether you've been bowling for years or are just starting, make sure your shoes are in good shape.
Benefits Of Wearing Bowling Shoes
1. Provides better motion: Introduces slides to the movement for better ball control and reduces jerks or sticking of feet to the floor.
2. Reduces injury risk: Smooth action reduces strain on muscles, avoiding injury to the ankle, foot, or back.
3. Accurate stoppage: Rubber soles in the back of shoes stop movement immediately after throwing the ball, preventing going over the foul line.
Accessories For Cleaning Bowling Shoes
a. Cleaner Spray: A cleaner spray with foaming solutions, stain removal, and shoe-shining capabilities will help in keeping your bowling shoes clean. Some examples are Bowling Oil Cleaner.
b. Wire Brush: A wire brush can be used to remove stains and dirt from the surface of your bowling shoes. Examples of wire brushes are Bowling Wire Shoe Brush.
c. Cleaning Towel: A cleaning towel or a clean cloth is necessary to dry your bowling shoes after cleaning with a solution or water. Examples of cleaning towels are Bowling Cleaning Towel.
d. Shoe Disinfectant: Disinfecting your shoes is crucial to keep germs and bacteria away, especially in the current pandemic.
Removing The Sliding Strip From Bowling Shoes
Get ready to improve your game by following these simple steps to remove the sliding strip from your bowling shoes.
Step 1: Start by taking off the sliding sole from your bowling shoes. Most sliding strips are attached with Velcro straps or snap hooks and can be removed easily.
Step 2: Flip the shoe over and carefully pull the sole off from either side. Be cautious not to tear the sole as it may be perforated.
Step 3: Inspect the sole and make sure there are no signs of damage. A damaged sole will affect its performance and could also be a safety hazard.
Step 4: Look for excessive fraying, holes, or tears which indicate that you need to replace the sole. If the sole is in good condition, proceed to the next step.
Cleaning The Slide Soles Of Your Bowling Shoes
Keeping your bowling shoes in good condition is essential to achieve maximum performance on the lanes. The slide soles of your shoes are particularly prone to dirt and debris buildup, which can cause sticking and affect your game. Here are two methods of cleaning the slide soles of your bowling shoes with a step-by-step guide.
For Interchangeable Soles:
- Fill a bowl with warm water and dish soap. Agitate the water to mix the soap and water.
- Soak the slide soles in the bowl for about 30 minutes. The dish soap will lift any debris stuck on them.
- Take the soles out of the bowl and gently scrub them with a bowling shoe brush to remove dirt, dust, and grime.
- Rinse the soles with warm water and let them air dry.
- Reattach the slide soles to your bowling shoes.
For Non-Interchangeable Soles:
- Turn your shoe over and locate the sole.
- Dampen the slide soles with water or dab them with a wet cloth.
- Add soap to the soles and use the brush to scrub the sole gently.
- Rinse the soles with warm water and let them air dry.
Note: When using a wire brush to clean any part of the bowling shoe, be careful not to scrub too hard or for too long, as this could damage the sole and cause problems with your shoes.
Brushing Direction Affects Slide Performance
When it comes to felt slide soles, the way you brush can determine the level of the slide. To achieve maximum glide, brush the sole in a repeated motion from the toe to the heel.
If you desire less glide, brush from heel to toe. If you're satisfied with the current amount of glide, brush the sole from side to side.
Essential Tips For Maintaining Your Bowling Shoes
Proper maintenance of your bowling shoes is key to keeping them performing at their best and extending their lifespan. Here are five tips to follow:
1. Proper Storage of Your Shoes: When not in use, it's important to store your shoes in a cool, dry place away from direct sunlight.
2. Use Your Bowling Shoes Only for Bowling: Wearing your bowling shoes outside of the bowling alley increases the chances of dirt and debris accumulating in the soles, affecting their performance.
3. Let Your Shoes Air Dry: After cleaning your shoes, it's important to allow them to air dry instead of using heat from sources such as a hair dryer, the sun, or a radiator, which can damage the materials and cause the shoes to break down faster.
4. Refrain from Using Harsh Chemicals on Your Shoes: Using harsh chemicals or cleaners on your shoes can damage the materials and increase wear and tear. Instead, use soap and water or a specialized bowling shoe cleaner.
5. Avoid Leaving Your Shoes in the Car: Leaving your shoes in the car after a visit to the bowling alley can result in extreme temperature changes that can cause the shoe materials to deteriorate and shorten their lifespan.
Note: If washing your bowling shoes, inspect the leather and use a soft brush to avoid flaking.
The Direction Of Brushing Impacts Slide
When it comes to felt slide soles, the way you brush can impact the number of slides you experience. To achieve maximum glide on the lane, brush your sole repeatedly in a toe-to-heel direction. Brushing in a heel-to-toe direction will decrease glide. If you're satisfied with the level of glide you have, brush your sole from side to side.
Cleaning and maintaining the slide strips of your bowling shoes is essential for optimal performance and to reduce the risk of injury. It is important to remove the sliding strip and inspect it for any damage before cleaning it with soap and water. Two methods are discussed, one for interchangeable soles and one for non-interchangeable soles.
It is important to brush the soles in a specific direction to achieve the desired level of glide. To extend the lifespan of your shoes and keep them performing at their best, proper maintenance is key and includes proper storage, only using them for bowling, air drying, avoiding harsh chemicals, and not leaving them in the car.